Tapes
Showing all 15 results
-
Tapes
1″ Black Electric Tape, Circuit-Guard PVC Insulating Tape (1 Inch)
Technical Specification: Black, flexible PVC (Polyvinyl Chloride) film. Width: 1 inch (≈25 mm). Length: 60 ft (≈18 m). Thickness: ≈7 mil. Insulation: Up to 600V (UL Listed). HVAC/Electrical Application: Primary electrical insulation for low-voltage wires, wire bundling/harnessing, and jacketing repair for standard cables. Care & Storage: Store at room temperature (50∘F to 80∘F) for maximum shelf life. Apply with slight tension for optimal seal. Approx. 0.25 lbs (≈0.11 kg)
SKU: TAPELEC-GEN01 -
Tapes
2″ Black Electric Tape, Circuit-Guard PVC Insulating Tape (2 Inch)
Technical Specification: Black, premium grade PVC film. Width: 2 inches (≈50 mm). Length: 66 ft (≈20 m). Thickness: ≈7 mil. Insulation: Up to 600V. HVAC/Electrical Application: Ideal for quickly wrapping larger cable bundles, providing a moisture seal over rubber splicing tapes, and creating robust mechanical protection against abrasion in conduit or panel entries. Care & Storage: UV and flame-retardant (where specified); store in original packaging to prevent adhesive contamination.Approx. 0.50 lbs (≈0.23 kg)
SKU: TAPELEC-GEN02 -
Tapes
2″ DUCT TAPE ADHESIVE WATERPROOF SEALANT ( 2″ )
Silver-Gray, Polyethylene (PE) Coated Cloth Duct Tape. Width: 2 inches (≈48 mm). Adhesive: Synthetic Rubber/Resin. Mesh: Standard 40-50 count. Temperature Rating (Operational): 40F to 150. Case Dimensions: 18 in×12 in×10 in (≈46 cm×30 cm×25 cm). Roll Diameter: ≈ 4.5 inches. Temporary sealing of non-critical air ducts, joining polyethylene sheeting vapor barriers, securing insulation batting, or bundling loose wiring during installation. Store tape rolls in a cool, dry environment (below 80F) away from direct sunlight. Ensure application surface is clean, dry, and free of grease before use for maximum adhesion. Per Roll (Approx.): 0.75 lbs (≈0.34 kg). Per Case of 24 Rolls (Approx.): 18.5 lbs (≈8.4 kg)
SKU: TAPDUCT-GEN02 -
Tapes
2″ Duct-Seal HVAC Aluminum Foil Tape (2 Inch)
Technical Specification: Dead-soft aluminum foil backing with a release liner. Width: 2 inches (≈50 mm). Length: 50 yards (≈45 meters). Thickness: ≈3.0 mil foil/adhesive total. Adhesive: High-performance acrylic adhesive. Temperature Range (Operational): −20∘F to 250∘F. HVAC Application: Sealing seams, joints, and connections on rigid and flexible air ducts (fiberglass board, sheet metal). Creates an excellent vapor barrier and thermal seal. Care & Installation: Ensure surface is clean and dry. Apply firmly using a squeegee or roller to ensure permanent adhesion and eliminate air bubbles.
SKU: TAPFOIL-HVAC02 -
Tapes
3″ Black Electric Tape, Circuit-Guard PVC Insulating Tape (3 Inch)
Technical Specification: Black, professional grade, heavy-duty vinyl tape. Width: 3 inches (≈75 mm). Length: 66 ft (≈20 m). Thickness: ≈7 mil (or 10 mil for heavy duty). Insulation: High dielectric strength (up to 600V/1000V). HVAC/Electrical Application: Used for high-abrasion applications, securing splices on high-voltage cables where thicker build-up is required, and wide-area cable jacketing repair. Care & Storage: Follow all manufacturer guidelines for cold weather application (usually requires a thicker tape or specialized technique below 0∘C).Approx. 0.80 lbs (≈0.36 kg)
SKU: TAPELEC-GEN03 -
Tapes
3″ DUCT TAPE ADHESIVE WATERPROOF SEALANT
Technical Specification: Silver-Gray, Polyethylene (PE) Coated Cloth Tape. Width: 3 inches (≈72 mm). Adhesive: Strong Synthetic Rubber/Resin. Mesh: Standard 40-50 count. Operational Temp. Range: 40∘F to 150∘F. HVAC Application: Used for sealing and patching heavier gauge ductwork, connecting vapor barriers on large insulation blankets, and securing flexible air ducts. Provides wider coverage for faster installation. Care & Storage: Store in a cool, dry area (below 80∘F); ensure surfaces are thoroughly cleaned and dried before application. Shipping (Approx.): Roll Diameter ≈5.5 inches; Case (16 Rolls) dimensions: 18 in×18 in×10 in. Approx. 1.15 lbs (≈0.52 kg)
SKU: TAPDUCT-GEN03 -
Tapes
3″ Duct-Seal Pro-Grade Aluminum Foil Tape (3 Inch)
Technical Specification: Dead-soft aluminum foil backing with an easy-peel release liner. Width: 3 inches (≈75 mm). Length: 50 yards (≈45 meters). Thickness: ≈3.0 mil foil/adhesive total. Adhesive: High-shear, aggressive acrylic adhesive. Temperature Range (Operational): −20∘F to 250∘F. HVAC Application: Used for critical sealing of longitudinal and transverse seams on high-velocity ductwork, insulation vapor barriers, and reflective thermal shielding. The wider format allows for quicker sealing of broad joints and increased material coverage. Care & Installation: Surface must be clean, dry, and oil-free. Use a plastic squeegee or roller to firmly press the entire surface of the tape down for maximum cold-weather performance and airtight seal.Approx. 1.5 lbs (≈0.68 kg)
SKU: TAPFOIL-HVAC03 -
-
Tapes
Black Electic Tape, Circuit-Guard PVC Insulating Tape (0.5 Inch)
Technical Specification: Black, flexible PVC (Polyvinyl Chloride) film tape. Width: 0.5 inches (≈12 mm). Length: 60 feet (≈18 meters). Adhesive: Non-corrosive rubber-based. Insulation: Dielectric strength minimum ≈1000V per mil. HVAC/Electrical Application: Primary electrical insulation for wire and cable splices up to 600V, harness wrapping, color-coding, and general wire bundling in control panels or conduits. Care & Storage: Store at room temperature away from solvents. Apply with tension for optimal moisture seal and adhesion.Approx. 0.10 lbs (≈45 grams)
SKU: TAPELEC-GEN0.5 -
-
-
-
-
